Wiss Thread Snips (also called Thread Clips) have a self-opening spring action that assures fast, effortless cutting. Thread snips are ideal for cutting thread, ribbon, paper, etc. These thread clips have a self-opening spring action that assures fast, effortless cutting. They are hot drop-forged from cutlery steel, and are fully nickel plated. They are also called inspector snips.
Product number # 58015 TC1
For the price and on-line purchasing, please click on the photo to the right.
This picture is linked to the appropriate Heimerdinger Cutlery on-line sales website page with product and price
Wiss Quick-Clip® Lightweight Speed Cutters (also called Wiss Thread Snips) with replaceable blades have a positive spring action that instantly re-opens the blades after each cut for fast cutting. These thread clips have stainless steel replaceable blades. They have a heavy-duty contour design, with sturdy, industrial PVC blue plastic handles. Their lightweight frames make continuous snipping comfortable and effortless. Wiss Quick-Clip Speed Cutters increase productivity, improve quality and reduce costs. They perform many cutting functions, including thread cutting, seam sipping, trimming, filament and wire cutting, garment finishing, cutting industrial tapes, wrappings, flower cutting and arranging. They are simple to adjust for run and cutting action. The replaceable blades are made of the highest quality razor stainless steel to insure extra cutting life. The blades are ground to a sharp knife edge. The blades and the handles will not rust or corrode. Wiss Quick-Clip Speed Cutters are unique and patented. They are designed and engineered for whenever fast, clean, accurate cutting and trimming is required. Their overall length is 4-1/4" and the length of cut is 1-1/4".
Product number 58126 (1570B)
For the price and on-line purchasing, please click on the photo to the right.
This picture is linked to the appropriate Heimerdinger Cutlery on-line sales website page with product and price
For the price and on-line purchasing of Quick Clip replacement blades (with or without extra screws), please click on the photo to the right.
How to replace the blades on the Wiss Quick-Clip speed cutter and reset the points: 1. Holding the Quick-Clip firmly, remove the large screw (a.) Caution: the spring between the frames may pop out when the screw is removed. 2. Remove four small screws. Insert new blades and replace screws. Reassemble by inserting spring in the front frame over the stud. Replace the back frame and hold in a closed position. Insert the large screw and tighten to desired tension. After installing new blades and reassembling the Quick-Clip, the points normally need to be reset. Close the cutter to check for blade cross-over. Roll up some cloth material that will be difficult to cut with the Wiss Quick-Clip. Place the material between the blades and attempt to cut the material by squeezing firmly. Remove the material and close the blades. If the blades still cross over, repeat the procedure with rolled up material between the blades, applying slightly more pressure until the proper point alignment is achieved.
This picture is linked to the appropriate Heimerdinger Cutlery on-line sales website page with product and price
Gingher Thread Snips, also called Thread Nippers, are a very attractive double chrome plated over nickel. They are knife edge for fast, effortless cutting. They measure 4-1/2" overall, and have a self-opening spring action. They are forged, which makes the metal harder so the thread clips stay sharp longer. These Gingher thread clips are assembled in the United States.
Product number G-TNKE
For the price and on-line purchasing, please click on the photo to the right.
This picture is linked to the appropriate Heimerdinger Cutlery on-line sales website page with product and price
Gingher Featherweight Thread Clips have a black nylon frame and stainless steel blades. This thread snip measures 4" overall, and is only 1/2 ounce in weight. This thread clip is excellent for thread cutting in sewing, embroidery and needlepoint.
Product number G-NS-4
For the price and on-line purchasing, please click on the photo to the right.
This picture is linked to the appropriate Heimerdinger Cutlery on-line sales website page with product and price
