$21
The Felco replacement cutting blade is made for the F2 pruner, the F4 pruner, the F-11 pruner, and F-400 pruner. Picture illustration instructions of how to replace this blade are shown on the back of the cutting blade packaging. Felco spare parts are manufactured to the highest and most rigorous quality standards.
3 in stock (can be backordered)
The Felco replacement cutting blade is made for the F2 pruner, the F4 pruner, the F-11 pruner, and F-400 pruner. Picture illustration instructions of how to replace this blade are shown on the back of the cutting blade packaging. One of the great advantages of Felco pruning and cutting tools is that in many models, parts affected by wear can be replaced. Just like the finished tools, Felco spare parts are manufactured to the highest and most rigorous quality standards.
The Felco 3.90 60 Pruning Knife has been called the everything knife. This single blade hawkbill folding knife is very utilitarian blade. It can be used in many areas of horticulture work. Made for Felco by Victorinox in Switzerland, manufacturers of the original Swiss Army Officer’s Knife.
The Felco F-600 Folding Pruning Saw measures 14 inches. It is a high-performance pull-stroke pruning saw which produces a clean, precise cut. The steel blade is heat treated and covered with hard chromium-plating for an extra tough, rust resistant blade. Resins will not cling to the blade and green wood will not clog the teeth.
The 19″ Felco 610 Pruning Saw with pull-stroke action is a high performance tool producing a clean, precise, and easy cut. The steel blade is heat treated and covered with hard chromium-plating for an extra tough, rust resistant, wipe-clean blade. The blade cuts as smoothly as if the wood was planed. The shape of the blade is thinner at the top and thicker at the bottom where the teeth are.
This Felco F-4 Standard Pruning Shear is a basic pruner. It has the famous Felco quality and cutting performance. It is 8-1/4″ long and weighs 7.8 oz (220 g).The blade adjustment is by the center bolt and nut only. Felco manufactures their products Switzerland.
The Felco 5/3 replacement cutting blade is made for the F5 pruner. Picture illustration instructions of how to replace this blade are shown on the back of the cutting blade packaging. Felco spare parts are manufactured to the highest and most rigorous quality standards.
This is the Felco 9-4 Replacement Contour Blade with screws for the F7 pruner and F8 pruner. A picture illustration on the packaging shows how to replace this part. Heimerdinger carries most of the replacement parts for the Felco pruners.
Felco F-2-90 Nut/Bolt Set for F-2 Pruner in shrink wrap. They come shrink-wrapped as a set. Each piece cannot and is not sold separately. Felco spare parts are manufactured to the highest quality standards.
The Felco 7/90 nut and bolt set is made for the F7, F8, F9, F10 and F13 pruners. These parts are individually identified as 7-7, 2-16, 7-8, and 2-9, but we do not sell them individually. They come shrink-wrapped as a set. Felco spare parts are manufactured to the highest and most rigorous quality standards.
The Felco 6/91 replacement springs for the Felco 6 and the Felco 12 pruner consist of two springs that come shrink-wrapped in one package as shown in the photo. One of the great advantages of Felco pruning and cutting tools is that in many models, parts affected by wear can be replaced. Just like the finished tools, Felco spare parts are manufactured to the highest and most rigorous quality standards.
The Felco 11/4 replacement anvil blade with screws is for the F11 pruner. One of the great advantages of Felco pruning and cutting tools is that in many models, parts affected by wear can be replaced. Just like the finished tools, Felco spare parts are manufactured to the highest and most rigorous quality standards.
This Felco F-621-3 Replacement Blade is for the Felco 621 Pruning Saw. The blade length is 9.5 (24 cm). It is a pull stroke action saw that puts certainty in your hands. PLEASE NOTE: This replacement blade will fit the handle for the Felco F-620 but then the saw will not fit in the sheath.
The Felco 30/4 replacement anvil blade with screws is made for the F30 pruner. Felco spare parts are manufactured to the highest and most rigorous quality standards.
Reviews
There are no reviews yet.